Plastic Flat Ring tower packing

Products introduction:

Plastic Flat ring has a small ratio of height to diameter, about 1:3.Due to its structure's change,effectively reducing the filler layer axial back mixing so as to improve the liquid-liquid mass transfer efficiency between two phases.Moreover, it is suitable for such packing liquid-liquid mass transfer of the extraction process.The Flat ring packing is similar to ring of the Cascade Mini Ring on the structure,but there are no top turn ups,guarantee packing unify orientation when piling up,increase pile density,make packing layer liquid distribute further more even improved inside separate.

Product Details

Technical data

Product Name			Plastic Flat Ring
Material			PP,PE,PVC,CPVC,PVDF ,etc
Life Span			>3 years
Size Inch/mm		Surface Area m²/m³	Void Volume %	Packing Number pieces/ m³	Dry Packing Factor m^-1
1”	25×9×1.0	160	88	170000	287
1-1/2”	38×13×1.2	145	92	460000	175
2”	50×17×1.5	128	93	21500	140
3”	76×26×2.5	116	93	6500	112
Feature		High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage		1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application		These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Physical & Chemical properties

Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C

Performance/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density(g/cm³)(after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
Chemical Corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength(Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0

Technical data

Product Name			Plastic Flat Ring
Material			PP,PE,PVC,CPVC,PVDF ,etc
Life Span			>3 years
Size Inch/mm		Surface Area m²/m³	Void Volume %	Packing Number pieces/ m³	Dry Packing Factor m^-1
1”	25×9×1.0	160	88	170000	287
1-1/2”	38×13×1.2	145	92	460000	175
2”	50×17×1.5	128	93	21500	140
3”	76×26×2.5	116	93	6500	112
Feature		High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage		1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application		These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Physical & Chemical properties

Performance/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density(g/cm³)(after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
Chemical Corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength(Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0

Packaging & Shipping

Package Type	Container Load Capacity
Package Type	20 GP	40 GP	40 HQ
Ton bag	20-24 m³	40 m³	48 m³
Plastic bag	25 m³	54 m³	65 m³
Paper box	20 m³	40 m³	40 m³
Delivery time	Within 7 working days	10 working days	12 working days
Comments:	Customized making is allowed.

Packaging & Shipping

Package Type	Container Load Capacity
Package Type	20 GP	40 GP	40 HQ
Ton bag	20-24 m³	40 m³	48 m³
Plastic bag	25 m³	54 m³	65 m³
Paper box	20 m³	40 m³	40 m³
Delivery time	Within 7 working days	10 working days	12 working days
Comments:	Customized making is allowed.