Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition,large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring.Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength.It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on.
Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition,large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring.Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength.It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on.
Technical data
Product Name |
Plastic Hiflow Ring |
|||||
Material |
PP,PE,PVC,CPVC,PVDF ,etc |
|||||
Life Span |
>3 years |
|||||
Size |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
|
Inch |
mm |
|||||
1/2” |
16 |
260 |
91 |
80 |
1/2” |
16 |
1” |
25 |
210 |
92 |
79 |
1” |
25 |
1-1/2” |
38 |
140 |
94 |
58 |
1-1/2” |
38 |
2” |
50 |
100 |
94 |
54 |
2” |
50 |
3-1/2” |
90 |
73 |
96 |
33 |
3-1/2” |
90 |
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
|||||
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
|||||
Application |
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. |
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
Performance/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation Temp.(℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Technical data
Product Name |
Plastic Hiflow Ring |
|||||
Material |
PP,PE,PVC,CPVC,PVDF ,etc |
|||||
Life Span |
>3 years |
|||||
Size |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
|
Inch |
mm |
|||||
1/2” |
16 |
260 |
91 |
80 |
1/2” |
16 |
1” |
25 |
210 |
92 |
79 |
1” |
25 |
1-1/2” |
38 |
140 |
94 |
58 |
1-1/2” |
38 |
2” |
50 |
100 |
94 |
54 |
2” |
50 |
3-1/2” |
90 |
73 |
96 |
33 |
3-1/2” |
90 |
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
|||||
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
|||||
Application |
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. |
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
Performance/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation Temp.(℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Packaging & Shipping
Package Type |
Container Load Capacity |
||
20 GP |
40 GP |
40 HQ |
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
Paper box |
20 m3 |
40 m3 |
40 m3 |
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Comments: |
Customized making is allowed. |
Packaging & Shipping
Package Type |
Container Load Capacity |
||
20 GP |
40 GP |
40 HQ |
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
Paper box |
20 m3 |
40 m3 |
40 m3 |
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Comments: |
Customized making is allowed. |