Plastic super intalox saddle tower packing
Products introduction:
The shape of the Intalox Saddle is a combination of the ring and the saddle, which benefits the advantages of the two.
This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate.
The shape of the Intalox Saddle is a combination of the ring and the saddle, which benefits the advantages of the two.
This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate.
Product Details
Technical data
|
Product Name |
Plastic Super Intalox Saddle |
||||||
|
Material |
PP/RPP/PVC/CPVC/PVDF,etc |
||||||
|
Life Span |
>3 years |
||||||
|
Size Inch/mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing |
||
|
1” |
25×12.5×1.2 |
260 |
90 |
51200 |
92 |
390 |
|
|
1-1/2” |
38×19×1.2 |
178 |
96 |
25200 |
75 |
201 |
|
|
2” |
50×25×1.5 |
168 |
97 |
6300 |
76 |
184 |
|
|
3” |
76×38×2.6 |
130 |
98 |
3700 |
64 |
138 |
|
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
||||||
|
Advantage
|
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
||||||
|
Application
|
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. |
||||||
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
|
Performance/ Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density(g/cm3) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
|
Operation Temp.(℃) |
90 |
＞100 |
＞120 |
＞60 |
＞90 |
＞150 |
|
Chemical Corrosion Resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
|
Compression Strength(Mpa) |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
Technical data
|
Product Name |
Plastic Super Intalox Saddle |
||||||
|
Material |
PP/RPP/PVC/CPVC/PVDF,etc |
||||||
|
Life Span |
>3 years |
||||||
|
Size Inch/mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing |
||
|
1” |
25×12.5×1.2 |
260 |
90 |
51200 |
92 |
390 |
|
|
1-1/2” |
38×19×1.2 |
178 |
96 |
25200 |
75 |
201 |
|
|
2” |
50×25×1.5 |
168 |
97 |
6300 |
76 |
184 |
|
|
3” |
76×38×2.6 |
130 |
98 |
3700 |
64 |
138 |
|
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
||||||
|
Advantage
|
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
||||||
|
Application
|
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. |
||||||
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
|
Performance/ Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density(g/cm3) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
|
Operation Temp.(℃) |
90 |
＞100 |
＞120 |
＞60 |
＞90 |
＞150 |
|
Chemical Corrosion Resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
|
Compression Strength(Mpa) |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
＞6.0 |
Packaging & Shipping
|
Package Type |
Container Load Capacity |
||
|
20 GP |
40 GP |
40 HQ |
|
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
|
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
|
Paper box |
20 m3 |
40 m3 |
40 m3 |
|
Delivery time |
Within 7 working days |
10 working days |
12 working days |
|
Comments: |
Customized making is allowed. |
||
Packaging & Shipping
|
Package Type |
Container Load Capacity |
||
|
20 GP |
40 GP |
40 HQ |
|
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
|
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
|
Paper box |
20 m3 |
40 m3 |
40 m3 |
|
Delivery time |
Within 7 working days |
10 working days |
12 working days |
|
Comments: |
Customized making is allowed. |
||
Leave us your information and one of our experts will assist you
We warmly welcome new and regular customers to join us hand in hand and cooperate happily!
Copyright © 2024 Pingxiang Ksource Chemical Packing Co., Ltd.