Tri-pak tower random packing, which is similar as polyhedral hollow ball packing, provides maximum surface contact between the gas and the scrubbing liquid by facilitating continous formation of droplets througout the packed bed. This result in high scrubbing efficiency, and minimizes total packing depth required. It can also prevent clogging, because there are no flat surface to harbor particulates. Tri-pak tower packing eliminates puddling too. Because its free of corners and valleys, and minimizes wasteful liquid flow down the wall surface. Tri-pak further prevent dry spots and compression interlock, two phenomena common to traditional packing media. Both conditions cause liquid and air channelling and decrease media efficiency.
Tri-pak tower random packing, which is similar as polyhedral hollow ball packing, provides maximum surface contact between the gas and the scrubbing liquid by facilitating continous formation of droplets througout the packed bed. This result in high scrubbing efficiency, and minimizes total packing depth required. It can also prevent clogging, because there are no flat surface to harbor particulates. Tri-pak tower packing eliminates puddling too. Because its free of corners and valleys, and minimizes wasteful liquid flow down the wall surface. Tri-pak further prevent dry spots and compression interlock, two phenomena common to traditional packing media. Both conditions cause liquid and air channelling and decrease media efficiency.
Technical data
Product Name |
Plastic Tri-Pak |
||||
Material |
PP, PE, PVC, CPVC, PPS , PVDF,etc |
||||
Life Span |
>3 years |
||||
Size mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
25 |
85 |
90 |
81200 |
81 |
28 |
32 |
70 |
92 |
25000 |
70 |
25 |
50 |
48 |
93 |
11500 |
62 |
16 |
95 |
38 |
95 |
1800 |
45 |
12 |
Feature |
1. Tri-Packs are hollow, spherical packings made of injection molded plastic, available in four diameters: 25,32,50,95mm 2. Symmetrical geometry made from a unique network of ribs, struts, and drip rods. 3. High active surface areas. 4. Extremely low pressure drops. 5. Extremely high operating capacities. |
||||
Advantage
|
6. high and mass heat transfer rates 7. Excellent gas and liquid dispersion characteristics. 8. Resist nesting, making removal easily 9. Available in a wide variety of plastics raw material 10. Predictable performance. |
||||
Application
|
11. Stripping, de-gasifier and scrubber 12. Liquid extraction 13. Gas & Liquid Seperation 14. Water treatment |
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF),The temperature in media ranges from 60 Degree C to 280 Degree C.
Performance/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation Temp.(℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Technical data
Product Name |
Plastic Tri-Pak |
||||
Material |
PP, PE, PVC, CPVC, PPS , PVDF,etc |
||||
Life Span |
>3 years |
||||
Size mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
25 |
85 |
90 |
81200 |
81 |
28 |
32 |
70 |
92 |
25000 |
70 |
25 |
50 |
48 |
93 |
11500 |
62 |
16 |
95 |
38 |
95 |
1800 |
45 |
12 |
Feature |
1. Tri-Packs are hollow, spherical packings made of injection molded plastic, available in four diameters: 25,32,50,95mm 2. Symmetrical geometry made from a unique network of ribs, struts, and drip rods. 3. High active surface areas. 4. Extremely low pressure drops. 5. Extremely high operating capacities. |
||||
Advantage
|
6. high and mass heat transfer rates 7. Excellent gas and liquid dispersion characteristics. 8. Resist nesting, making removal easily 9. Available in a wide variety of plastics raw material 10. Predictable performance. |
||||
Application
|
11. Stripping, de-gasifier and scrubber 12. Liquid extraction 13. Gas & Liquid Seperation 14. Water treatment |
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF),The temperature in media ranges from 60 Degree C to 280 Degree C.
Performance/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation Temp.(℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Packaging & Shipping
Package Type |
Container Load Capacity |
||
20 GP |
40 GP |
40 HQ |
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
Paper box |
20 m3 |
40 m3 |
40 m3 |
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Comments: |
Customized making is allowed. |
Packaging & Shipping
Package Type |
Container Load Capacity |
||
20 GP |
40 GP |
40 HQ |
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
Paper box |
20 m3 |
40 m3 |
40 m3 |
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Comments: |
Customized making is allowed. |